Hall: 4.2 Stand: 4.2-C31
- | DIGITAL PRINTING INKS
- | SMALL FORMAT DIGITAL PRINTER
- | WIDE FORMAT DIGITAL PRINTER - FLATBED
NEW: DSE100 – Aluprinter for subsurface printing in anodised aluminium with open pores.
DuraSeal sheets are anodised aluminium plates with open pores and a decorative surface structure. This allround base plate is very suitable for printing durable razor-sharp images into the anodised layer by means of digital printing using our DSE-Aluprinter or by silkscreen printing. A protective coating applied to the material guarantees a 1 year shelf life. - Can be processed mechanically beforehand - Supplied with a protection foil Anodised layer DuraSeal25: 23 - 25 mu DuraSeal20: 17 - 21 mu DuraSeal15: 13 - 1 mu Material thicknesess 0.3 mm 0.5 mm 0.8 mm 1.0 mm 1.5 mm 2.0 mm 2.5 mm 3.0 mm 4.0 mm Surface structures Mat: Available in every thickness Satin: Avavailable in every thickness except 2.5, 3.0 and 4.0 mm Glossy: Only available in 0.5 mm Shelf life 12 months under the following conditions: - Relative humidity: 50 - 55% - Temperature: 18 - 25 °C
Duracolour Solvent-based inkjet for digital printing in DuraSeal and DuraPor sheets by the means of the DSE-Aluprinter (digital flatbed printer). - Available in the clours C, M, Y, K and Transparent - Shelf life is 1 year when closed properly , < 25°C
Following the successful introduction of the DSE60-Aluprinter in 2021, Polychromal has decided to produce a new DSE100-Aluprinter based on the same advanced technology as the DSE60. The printer has a ...