Crown Norge AS
- | TOOLS & ACCESSORIES
- | ARCHITECTURAL
- | CNC ROUTER
- | ENGRAVING & ETCHING
- | SIGN MAKING TOOLS
Crown Norge, the perfect partner you can trust. Precise and high quality tooling designed to fully optimise your machine’s cutting performance. The innovation, knowledge and experience to significantly improve your manufacturing process
AddressH. N. Haugesvei 77
Crown Norge will be displaying its range of diamond polishing tools. Specifically designed for clear cast or extruded acrylic, these tools give a superior polished surface finish when used with the correct machine. With an extensive range of dimensions to cover even some of the thicker acrylics, the PCD, MCD and MVCD range from Crown Norge give a glass clear surface finish.
The range of ACM and solid aluminium folding tools from Crown Norge will be on display at the Fespa global expo. These include the common angles for ACM folding. The introduction of the SUPERIOR coating on the 90 degree tools also increases the tool life and production rates. Folding solid aluminium by hand is also possible with the 10mm ball nose SUPERIOR coated tool. This is achieved without the need for coolant or oil.
The MP SUPERIOR coated tooling range will be on display with new sizes now added to the range. The revolutionary coating on these tools assists with heat and friction reduction allowing them to dry rout aluminium on all CNC machine types with a routing spindle. The MP SUPERIOR coated tools can also be used in Trespa HPL, ACM and mineral core ACM with great success.
The new acrylic GEN2 tooling from Crown Norge will be on display at the Fespa global print expo for the first time. Specifically designed to cut clear acrylic in a single pass with a near polished and clear edge. These new and improved tools will fit all CNC router spindles and will give exceptional results when used in combination with a high quality CNC machine. These new tools are available in the most common dimensions
Crown Norge will be displaying the range of 3D V-Tools at the Fespa Expo. This range of tools covers 60, 90,120 and 150 degrees which are perfect for V-Carving and beveling in a variety of materials. Very stable and with a long tool life in plastics, woods and MDF. These tools have a solid carbide core which is 5mm thick and achieve an extremely high cut quality.
The extensive MP range of tools from Crown Norge will also be on display at the Fespa Expo. This range of tools are perfect for aluminium, ACM, brass, plastics and MDF and are available in both up and down cut, in many different dimensions. A range of balanced MP tools are also available for high frequency spindles.
Processing 3mm aluminium with the MP Superior coated range of tools.
Processing and finishing 5mm acrylic with the range of carbide and diamond polishing tools.
Routing and folding Alucobond A2 mineral core ACM
Plywood, MDF and solid woods can be routed to perfection with the range of compression tooling from Crown Norge. The top and bottom face of the material has no splinters or chips due the up and down s ...
High pressure laminate such as Trepsa is easily routed with the MP SUPERIOR coated range of tools from Crown Norge. This demanding and tough material can be cut at high speed at a variety of thickness ...
Softwood such as Pine can be easily and cleanly routed using the razor sharp Acrylic (A) range from Crown Norge. The additional sharpness in the tool leaves a clean finish and the spiral action of the ...